Click the “Next” button and wait for the drivers to be installed. Now right click on the faulty device, select “Update Driver”, then “search on this computer” next “Browse my computer” … and specify the path to “C: Program Files (x86) XHorse Electronics MVCI Driver for TOYOTA TIS “(” include subfolders “check box). They will have a yellow icon indicating that Windows could not install the drivers for them. Open the Device Manager and locate the two faulty devices in the list. IMPORTANT: When the automatic driver installation process starts, it must be canceled and the device will not be detected.ħ. Connect the MINI VCI cable to the USB port. We go in C: Program Files (x86) and create there folder XHorse Electronics and in it one more MVCI Driver for TOYOTA TIS and move there all the contents from the folder C: Temp mvciĦ. We delete the file MVCI Driver for TOYOTA.msi from the folder C: Temp mvci, it is no longer needed, we can also remove it from the folder C: Tempĥ. This command will extract all content from the MSI file to the C: Temp mvci folderĤ. Msiexec / a “C: temp MVCI Driver for TOYOTA.msi” / qb TARGETDIR = c: temp mvci With Administrator rights open and run the following command: Copy to our C: Temp folder our MVCI Driver for TOYOTA.msi fileģ. This problem can be solved by installing the MVCI Driver for TOYOTA.msi manually as follows:Ģ. If you bought the MINI VCI J2534 cable and there is no unpacked driver on the disk, and there is only the MVCI Driver for TOYOTA.msi installer that does not really work when installed on any Windows 圆4 and gives an error, and it must be installed, otherwise the sw will not work, and it does not matter. INSTALLATION INSTRUCTIONS Techstream on Windows 7, 8.1 – 圆4 bit The instruction can be found on the Internet, but I will write it here. Then I will tell you how to install the driver and the program under Windows 7 or 8.1 圆4. I post links for download: Toyota Techstream 10.10.018, drivers MVCI_Driver_for.msi Package includes the drivers for the cable and the program itself-Toyota Techstream with V10.10.018 version. Clone Mini VCI FW 1.4.0 cable If you would want to reset immo, or make customization to cars, need at least 2.0.4 FW with 2.0.4 FW there is change in PCB, as it support VPW, and has extra security chip on the other hand, all these simple clones with.
Make sure to remove the old drivers first. These are the only instructions that I found that worked. Solved: Windows 10 driver for Mini VCI cable (J2534) For those that are using EBay/Amazon Mini VCI cables, the driver fails on Windows 10. I used it and found that you can do a lot with it through the Toyota Techstream service program.
I bought a cheap Chinese Mini VCI J2534 cable for diagnostics and auto settings.
0 kommentar(er)
